330CC | 3B Craft Cantiere Navale 2018-11-13T16:08:27+00:00

330 CC | 3B Craft

330 CC – Video gallery

330 CC – Data sheet

330 CC – SPECS

Overall length: 10,05 m
Hull length: 9,99 m
Maximum beam: 3,60 m
Fuel capacity: 1.000 l
Fresh water capacity: 150 l
Maximum horsepower: 2 x 350 HP – 3 x 350 HP
Sleeping capacity: 2
CE navigation category: B – Maximum persons capacity: 8
CE navigation category: C – Maximum persons capacity: 12

STANDARD MECHANICAL AND ELECTRICAL FITTING

General electrical system

Electrical system 12 V
General electrical panel inside
Helm panel with switches
Compass 4”
Battery charger 60 Ah
2 x  200 Ah batteries
n° 3 battery switches
Battery parallel
Cable with dockside power
Current taps 12 V
Current taps 220 V
Built-in lights in all the rooms

Fuel system

Stainless steel fuel tank – capacity 1.000 l
Fuel level indicator
n° 1 fuel filler cup
Fuel filters

Fresh water system

Fresh water tank – capacity 150 l
Water level indicator
n° 1 fresh water filler cup
Fresh water pressure system pump

Bilge pump system

n° 2 automatic bilge pumps
n° 2 manual bilge pumps

Trim tabs system

Hydraulic trim tabs system 12 V with stainless steel plates
Digital trim tabs indicators

Steering system

Pump for hydraulic steering
Ships’ wheel

Windlass system

Electrical windlass 1000 W
Windlass double control
Bow plate
Anchor 10 kg
Joint for anchor
50 m zinc plated chain Ø 8
Chain peak with drain

Safety

n° 2 manual dry fire extinguishers
Remote-controlled fuel tank closing system

Complete system of zincs for galvanic current

STANDARD OUTDOOR FITTING

Hull

Gel coat
Hand-laid fiberglass with vinyl ester resin skin coats
Termanto cored topsides
Solid fiberglass bottom
Boot line
Antifouling bottom paint
PVC rubbing strake

Deck

Gel coat
Hand-laid fiberglass
Termanto core

Structures

Ply-Foam stringer system
Plywood bulkheads

Navigational lights

Navigational lights
Stainless steel support for 360° light
Radar reflector

Portholes

n° 4 aluminium portholes with plexiglas

Cockpit and deck fitting

Side stainless steel handrails on deck stringers
Glued tempered glasses
Windshield wiper with washer
Fiberglass Hard Top on a stainless steel structure
n° 1 aluminium hatchway with plexiglas in the hard top
Lights fore and aft
n° 8 stainless steel folding mooring cleats
n° 2 stainless steel fixed mooring cleats
n° 2 stainless steel stern mooring hawsers
n° 9 stainless steel built-in rod holders
Acoustic warning signal
Bow bench with cushions
Bow chaise longue with cushions
Cockpit unit with:

  • n° 3 pilot and co-pilots chairs
  • stern seat
  • bait and tackle storage drawers

Footrest under the driver’s seats
Courtesy lights
Cockpit paddings
Fresh water shower in cockpit
Transom door with tuna gate
Bulwarks door
Transom fish box with pump in the stern bulwarks
Stern tub for fish
Stern sink
Stainless steel boarding ladder
Self-draining cockpit
Non-skid surface on the deck and the cockpit

STANDARD INTERNAL FITTING

Bow cabin

Sliding entrance door in the cabin in plexiglas with lock
Cabin stairs with wood steps
Dinette lounge with cushions convertible into berth for two
Dinette table in wood
Clock, barometer and thermometer with hygrometer
Mirror on the bulkhead
Storages below lounge
Hanging closet
42 l refrigerator 12 V
Retractable cooker

Bathroom

Bathroom unit with counter top, sink and hand shower
Mirror
Electrical toilet
Shower water extraction electric pump and tank
Waste system with holding tank, level and filter

Inside furniture and cabin floor in wood

OPTIONAL EQUIPMENT

Hard Top total enclosures
Cockpit sliding curtain
Synthetic teak coating for: upper cockpit, footrest under the driver’s seats and swim platform
AM/FM stereo with CD and 4 speakers
Electrical hot water heater 220 V – capacity 15 l
49 l stainless steel drawer refrigerator 12 V in the cockpit
Bow propeller
2,5 kW diesel generator
7.000 BTU/h air conditioning system in the cabin
n° 2 cockpit sockets 12 V
Cockpit sea water pump
Cockpit storage box with sink and cooker
Opening stern bench with cushion
Bow curtain
Bow table in teak
n° 6 stainless steel side built-in rod holders
Stainless steel and PVC “bottazzo”
Custom hull GELCOAT colour (when different from white)

3B Craft Srl

Via Giuseppe Toniolo, n° 22/A
61032 Bellocchi di Fano (PU)

Phone: 0721. 855933

Fax: 0721. 855933

Web: visita il nostro sito